1955-57 Chevy Belair Hydropower Brake Booster

1955-57 Chevy Belair Hydropower Brake Booster
Part # HB2-C5557
Weight 35.00 lbs
Our price: $766.50

Click here to be notified of price drops for this item
Brake Type
CA Prop 65 Warning - cancer and reproductive harm www.p65warnings.ca.gov

1955-57 Chevy Belair Hydraulic brake assist power brake booster kit is smaller then the 7" vacuum booster currently used in most applications.
 The Hydropower generates 1000 to 1800psi to the calipers and fits a 1.125" bore size master cylinder.
 It requires 'no vacuum'. The Hydropower is powered by hydraulic pressure from the power steering pump. Great solution for low vacuum high performance motors. No 'small bore' master required. Firewall and valve cover clearance is increased. 

 The Hydropower can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications.
 The Hydropower uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydropower® uses this pressure that is always circulating through it, to convert to pressure to apply against the master cylinder. The output of the Hydropower is affected by three factors.

 1. The pedal ratio. We prefer that the pedal ratio be between 5:1 to 6:1.
 2. The pressure output from the pump.
 3. The master cylinder bore diameter. These are factors necessary to design the system that will work for a given application.

 It is imperative that the system be clean. Any residual metallic sediment laying in an old pump or steering box, will be floated up and through the system when the fluid comes through on start up. If any of this sediment lodges in the relief valve of the pump, there will be no pressure from the pump. This will result in hard steering and no power brakes. A filter or a new system is required to maintain any warranty.

Kit includes:
• Hydropower brake booster
• Master cylinder
• Prop valve (disc applications only)
• Firewall Mounting brackets
• Prop valve bracket
• Prop valve lines
• Limited Lifetime Warranty

Product fits: 1955 56 57 Chevy Belair, Nomad, 210, 150, Fullsize

Stainless Hose kit with fittings sold separately, Add $259.95. Please specify.
 Rubber Hose kit with fittings also available, Add $$209.99.

 These are remanufactured Hydropower units. These are not chinese imported units commonly found.