Power Brake Vacuum Hose

Actual circumference:

11/32" x 3' 8.73 mm x 914.4 mm

Installation Tips:

1. Remove old hose. Take care not to dislodge or damage the valve in the booster.

2. Install new hose, routing it away from high heat sources (such as exhaust manifolds), and moving parts. Take care not to kink the hose or collapse it with securing strips.

3. Install the new hose clamps where used.

4. Start the engine and bring the engine compartment to operation temperature. Verify correct operation of the brakes. Note: Excessive pedal travel or poor engine running may be indications of a vacuum leak or other problem. Vary engine rpm and inspect the vacuum brake hose for any sign of kinking or collapse. Re-route the hose if needed.

5. Consult the owner's manual or a qualified mechanic if the cause of any malfunction cannot be determined and corrected.

If you detect a problem, do not drive the vehicle as braking performance may be degraded.