1971-72 Chevy / GMC C20 - C30 Truck Tubular Control Arm Set

NEW 1971-72 Chevy and GMC C20/C30 truck tubular upper and lower control arm design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring. We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and true. These arms come with factory early model cross shafts for ease of installation and increased ground clearence. Works with drop spindles. Corrects geometry for lowered applications. Requires use of aftermarket sway bar.

Kit includes:

• 2 upper control arms
• 2 lower control arms 
• Gloss Black powder coated
• 1.250" x .188" DOM tubing
• 4 cross shafts (installed)
• 2 lower ball joints (If applicable)
• 2 upper ball joints (If applicable)
• Hardware
• Limited Lifetime Warranty
• Sold in sets

Notes:

Due to our improved design, these lower arms now require the use of our after market sway bar. This bar is also dimensionally the same as the Addco type offered by many retailers.
Manufactured in the USA

Application:  1971, 1972 Chevy, GMC C20 and C30 truck, Suburban